Collision Solids
The CollisionSolid is the fundamental object of the collision system. CollisionSolids represent special invisible geometry that is created solely for the purpose of performing collision tests; these CollisionSolids are stored in the scene graph alongside the normal visible geometry.
The CollisionSolids are specifically optimized for performing collision tests quickly. Collisions can be performed against visible geometry as well, but this is more expensive since visible geometry is not optimized for this sort of thing.
You can create CollisionSolids interactively in program code, or you can construct them in your modeling package and load them up from an egg or bam file along with the rest of your scene.
When you create a CollisionSolid interactively, you must also create a CollisionNode to hold the solid. (When you load your CollisionSolids in from an egg file, the CollisionNodes are created for you.) Often, a CollisionNode will be used to hold only one solid, but in fact a CollisionNode can contain any number of solids, and this is sometimes a useful optimization, especially if you have several solids that always move together as a unit.
cs = CollisionSphere(0, 0, 0, 1)
cnodePath = avatar.attachNewNode(CollisionNode('cnode'))
cnodePath.node().addSolid(cs)
CollisionNodes are hidden by default, but they may be shown for debugging purposes:
cnodePath.show()
Note
Be aware that the collision algorithm has only limited awareness of scaling transforms applied to CollisionSolids. This particularly applies to non uniform scales, ie. when the X, Y and Z components of a scale transform are not all the same. If unequal scaling is applied between a “from” collider and an “into” collider, unexpected results may occur. In general, strive to have as few scaling transforms applied to your collision solids as possible.
There are several kinds of CollisionSolids available.
CollisionSphere
The sphere is the workhorse of the collision system. Spheres are the fastest primitives for any collision calculation; and the sphere calculation is particularly robust. If your object is even vaguely spherical, consider wrapping a sphere around it.
Also, a sphere is a particularly good choice for use as a “from” object, because a sphere can reliably be tested for collision with most of the other solid types. The “from” objects are the objects that are considered the active objects in the world; see Collision Traversers. A sphere is usually the best choice to put around the player’s avatar, for instance. The sphere also makes a good “into” object; it is the only object type that is a good choice for both “from” and “into” objects.
A sphere is defined in terms of a center and a radius. Note that, like any object, the sphere’s coordinates are defined in the sphere’s own coordinate space, so that often the center is (0, 0, 0).
sphere = CollisionSphere(cx, cy, cz, radius)
CollisionTube
A “tube” is a cylinder with hemispherical endcaps, also known as a capsule or a spherocylinder.
The tube is good as an “into” object, for objects that are largely cylindrical. It is not a very good choice for a “from” object, because not many intersection tests have been written from tubes into other shapes.
A tube is defined with its two endpoints, and the cylindrical radius.
tube = CollisionTube(ax, ay, az, bx, by, bz, radius)
CollisionInvSphere
The inverse sphere is a specialpurpose solid that is rarely used, but occasionally it is very useful. It is an insideout sphere: the solid part of the sphere is on the outside. Any object that is on the outside of the sphere is considered to be colliding with it; any object on the inside is not colliding.
Think of the inverse sphere as a solid mass that fills the whole universe in all directions, except for a bubble of space in the middle. It’s useful for constraining an object within a particular space, since nothing can get out of an inverse sphere.
inv = CollisionInvSphere(cx, cy, cz, radius)
CollisionPlane
The CollisionPlane is an infinite plane extending in all directions. It is not often used, but it can be useful in certain cases, for instance as a trigger placed below the ground to detect when an avatar has accidentally slipped through a crack in the world. You can also build a box out of six planes to keep objects perfectly constrained within a rectangular region, similar to an inverse sphere; such a box is much more reliable than one constructed of six polygons.
The plane actually divides the universe into two spaces: the space behind the plane, which is all considered solid, and the space in front of the plane, which is all empty. Thus, if an object is anywhere behind a plane, no matter how far, it is considered to be intersecting the plane.
Although it can only be used as an “into” solid, it is the most reliable of the “into” solids; tests are implemented for every “from” solid, and since it extends out infinitely, there is no possibility of glitching through it. This makes it an excellent choice for a ground plane in games where the ground is mostly level.
A CollisionPlane is constructed using a Panda3D Plane object, which itself has a number of constructors, including the A, B, C, D plane equation, or a list of three points, or a point and a normal.
plane = CollisionPlane(Plane(Vec3(0, 0, 1), Point3(0, 0, 0)))
CollisionPolygon
A CollisionPolygon is the most general of the collision solids, since it is easy to model any shape with polygons (especially using a modeling package). However, it is also the most expensive solid, and the least robust–there may be numerical inaccuracies with polygons that allow collisions to slip through where they shouldn’t.
Like a plane and a tube, a CollisionPolygon is only a good choice as an “into” object. It doesn’t support collision tests as a “from” object.
In general, if you must use CollisionPolygons to model your shape, you should use as few polygons as possible. Use quads instead of triangles if possible, since two triangles take twice as much time to compute as a single quad. This does mean that you need to ensure that your quads are perfectly coplanar.
You can also make higherorder polygons like fivesided and sixsided polygons or more, but you cannot make concave polygons. If you create a concave or noncoplanar CollisionPolygon in your modeling package, Panda will automatically triangulate it for you (but this might result in a suboptimal representation, so it is usually better to subdivide a concave polygon by hand).
Unlike a plane, a CollisionPolygon is infinitely thin; an object is only considered to be colliding with the polygon while it is overlapping it.
When you create a CollisionPolygon interactively, you can only create triangles or quads (the higherorder polygons can only be loaded from an egg file). Simply specify the three or four points to the constructor, in counterclockwise order.
quad = CollisionPolygon(Point3(0, 0, 0), Point3(0, 0, 1),
Point3(0, 1, 1), Point3(0, 1, 0))
CollisionRay
The ray is a special collision solid that is useful only as a “from” object; since the object has no volume, nothing will collide “into” a ray. The same is true for line, parabola, and segment listed below.
The CollisionRay represents an infinite ray that begins at a specific point, and stretches in one direction to infinity.
It is particularly useful for picking objects from the screen, since you can
create a ray that starts at the camera’s point of view and extends into the
screen, and then determine which objects that ray is intersecting. (In fact,
there is a method on CollisionRay called setFromLens()
that automatically
sets up the ray based on a 2d onscreen coordinate; this is used by the
“picker”. See Clicking on 3D Objects.)
The CollisionRay is also useful in conjunction with the CollisionHandlerFloor; see Collision Handlers.
A CollisionRay is created by specifing an origin point, and a direction vector. The direction vector need not be normalized.
ray = CollisionRay(ox, oy, oz, dx, dy, dz)
CollisionLine
This is essentially the same as a CollisionRay, except it extends to infinity in both directions. It is constructed with the same parameters, an origin point and a direction vector.
line = CollisionLine(ox, oy, oz, dx, dy, dz)
CollisionSegment
A segment is another variant on the CollisionRay that does not extend to infinity, but only goes to a certain point and stops. It is useful when you want to put a limit on how far the CollisionRay would otherwise reach.
A CollisionSegment is constructed by specifying the two end points.
segment = CollisionSegment(ax, ay, az, bx, by, bz)
CollisionParabola
A parabola is another variant on the CollisionRay that bends. It is useful when you want to test with arcs, such as a cannonball shot.
CollisionBox
Finally, a box represents a cuboid. It consists of three pairs of rectangles, with adjacent sides meeting each other at a right angle. This can be employed where ever a necessity arises for using six intersecting planes. A box can be both a ‘from’ and ‘into’ object for the shapes specified in the chart. A box can only be constructed as an AxisAligned Bounding Box (AABB). That is, each side of the box is parallel to one of the coordinate axes. Once constructed, all collision tests are performed on the box as though it was an OrientedBounding Box (OBB).
There are two constructors for the Box. One of them specifies the center for the box as well as the distance of each of the sides from the center.
box = CollisionBox(center, dx, dy, dz)
The second form of constructor takes the two diagonally opposite end points of the AABB.
box = CollisionBox(Point3(minx, miny, minz), Point3(maxx, maxy, maxz))
Collision System Chart
Here is a table of the Collision Solids that can be used as “from” and “into” objects in a Collision.
At noted above, with no volume CollisionRay, CollisionLine, CollisionParabola, CollisionSegment are only “from”, never “into” and hence not listed as columns in the table below.
At present, CollisionFloorMesh, CollisionInvSphere, CollisionPlane, and CollisionPolygon are only “into” and never “from” and hence are not listed as rows in the table below.
In the table below, the solid is listed without its “Collision” preface, e.g., “Sphere” instead of “CollisionSphere”, to save on space.
From \ Into 
FloorMesh 
InvSphere 
Plane 
Polygon 
Sphere 
Tube 
Box 
Line 
Yes 
Yes 
Yes 
Yes 
Yes 

Parabola 
Yes 
Yes 
Yes 
Yes 

Ray 
Yes* 
Yes 
Yes 
Yes 
Yes 
Yes 
Yes 
Segment 
Yes 
Yes 
Yes 
Yes 
Yes 
Yes 

Sphere 
Yes 
Yes 
Yes 
Yes 
Yes 
Yes 
Yes 
Box 
Yes 